JK series mine hoist It refers to the main transportation equipment connecting underground and ground in mining engineering. Mine hoist is installed on the ground, with the help of steel wire rope to drive the lifting container to run along the shaft or ramp. It is used for lifting coal, ore, gangue, lifting personnel, lowering materials, tools and equipment in shaft and inclined shaft.
Mine hoist is sometimes called mine elevator, it is a special form of elevator, can also be seen as a simple elevator. In the project of transporting people and objects, mine hoist is a very important conveying tool. The mine, especially the underground conditions and working environment are worse than those on the ground. Therefore, it is necessary to ensure the safety of the mine hoist, and carefully understand and master a series of problems such as its structure, working characteristics and design methods.
Product features, main uses and scope of application:
JK series hoists are designed and manufactured according to the industrial standards of the people's Republic of China AQ 1035-2007 safety inspection code for single rope winding mine hoist, GB / t20961-2007 single rope winding mine hoist and enterprise standard Q / hbwf003-2016 single rope winding mine hoist of Hebi Wanfeng Mining Machinery Manufacturing Co., Ltd.
It is suitable for coal mine, metal mine and non-metallic mine ground or underground inclined roadway and shaft as lifting material and personnel.
When starting the main motor, the motor rotor transmits the power to the high-speed shaft of the reducer through the elastic coupling. After being driven and decelerated by the reducer, the passive shaft of the reducer is transmitted to the main shaft device through the gear coupling. If the rotation direction of the motor is changed continuously, the drum can be wound or the wire rope can be loosened, so that the hoisting container can go up and down periodically in the shaft Sports.
1) organize installation personnel to the construction site to check whether the foundation meets the installation requirements, and clean the installation site.
2) the foundation parts (bearing beam, brake seat, reducer and motor base at the lower part of the main shaft device) that need secondary grouting shall be scraped into rough surface, and the oil stain shall be removed and the foundation shall be washed with clean water.
3) the position where the pad iron is placed shall be leveled, leveled or leveled with 1:2 cement sand mortar.
4) open the box and check the quantity of the equipment, clean the antiseptic and rust removal of the friction surface.
5) check the installation elevation, the position of the middle line of the main shaft and the middle line of the hoist, and check whether the datum point is complete and accurate.
When the mine hoist is installed, the construction should be organized according to the sequence of the installation progress chart. In order to shorten the installation period, the division of labor of personnel should be reasonably allocated and parallel operation should be implemented. The main operation line runs through the whole line, and the projects with long interval processes should be given priority to prevent the process reversal and rework. For example:
First install the main shaft, and at the same time, the electric control equipment can be constructed.
(2) after the main shaft is fixed and installed, the reducer is installed based on the spindle coupling, and the drum assembly and motor are ready for operation.
(3) after the reducer is installed, the motor is installed based on the high-speed shaft coupling. At the same time, some personnel can be organized to assemble the drum. At this time, the motor can also be set out and wired.
(4) after the motor pair is installed, the main parts of the hoist have been installed. At this time, efforts should be organized to construct the lubrication system and brake system. If the brake disc and drum are to be welded on site, the brake system can only be assembled after the welding is completed and the brake disc is turned.
(5) the installation of the whole machine shall be inspected and accepted by the relevant departments at higher levels, leaders at all levels and engineering technical leaders, and the idle running shall be carried out. Before the idle running, the jacking screw device shall be adjusted, and the main shaft bearing beam and reducer shall be jacked to prevent loosening. The secondary grouting can be carried out only when everything is normal.
Representation of product model:
The indication method of hoist model shall comply with the provisions of MT / T 154.8-1996 "preparation method of coal mine machinery product model".
1. 9 times for lifting personnel; 2. Lifting personnel and materials (9 times for lifting personnel, 9 times for mixed lifting, 7.5 times for lifting materials); 3. 6.5 times for lifting materials.
2. The ratio of the diameter of the drum to the diameter of the steel wire rope of the mine hoist in the mine shall not be less than 80 times; the ratio of the diameter of the drum to the diameter of the steel wire rope of the hoist in the underground mine shall not be less than 60 times.
III. The number of winding layers of wire rope on the drum shall meet the following requirements:
1. Floor 1 for lifting personnel or lifting personnel and materials in the shaft; floor 2 for lifting materials;
2. There are 2 floors for lifting personnel and materials in inclined shafts; 3. For lifting personnel and materials during well construction, 2 floors.